Vacuum Sealer Packaging Food Saver Vacuum Sealer Packaging Food Saver - HomiaStore

Vacuum Sealer Packaging Food Saver

Manual for HOMIA Fusion Vacuum Sealer with Starter Kit





You are about to enjoy the freshness benefits of the Best-selling Vacuum Preservation System Brand. For years, the Vacuum Preservation System has helped millions of households keep food fresh longer in the refrigerator, freezer and pantry. The system is designed to remove air and extend freshness up to 7 times longer than conventional storage methods. Keep your appliance at home, and you will soon discover its convenience and versatility.

Why do you need a vacuum sealer ?

Exposure to air can cause food to lose flavour and nutrition, it can also encourage the growth of bacteria and yeast which will cause the food to spoil. The vacuum packaging system removes air and seals flavour and freshness. With the vacuum packaging system, you can keep your food fresh for up to 7 times longer.


Save money:

With the vacuum sealing system, you can buy food in advance or on sale and preserve it in your desired portion size without being afraid to waste it.

Save time:

Cook ahead for the week, prepare meals and save them in vacuum bags.

Make entertaining easy:

Prepare your favorite dishes and festival feast in advance so you can spend time having fun with your guests instead of working in the kitchen Enjoy seasonal or specialty foods: Keep highly perishable or rarely used items fresh longer.

Control portions for dieting:

Vacuum package sensible portions and write calories and/or fat content on the bag.

Protect non-food items:

Keep camping and boating supplies dry and organized for outings, protect polished silver from tarnishing by minimizing exposure to air.




Please read and follow the safety instruction carefully before you use vacuum preservation system

1.Please check if the local power supply voltage matches the voltage indicated on this appliance before use.

2.Do not operate the appliance with a damaged power cord or plug. Do not operate the appliance if there's any malfunctions or damage of the product . If the cord or the appliance is damaged ,it must be returned to an authorized service center.

3.To disconnect the power, unplug the power cord from the electrical outlet. Do not disconnect by pulling the power cord.

4.If the supply cord is damaged, it must be replaced by the manufacturer, or it's service agent or similarly qualified person in order to avoid a hazard.

5.Do not use an extension cord with the appliance.

6.When the appliance is not in use or need to be cleaned, please unplug cord from the power outlet first.

7.Do not use the appliance on wet or hot surfaces, or near a power source.

8.Do not immerse any part of the appliance, power cord or plug in water or other liquid.

9.Use only accessories or attachments recommended by the manufacturer.

10.Use the appliance only for it's intended use. Don't use the product outside the work area.

11.Close supervision is required when children use the appliance. Do not play with the appliance as a toy.

12.Intervals for 40 seconds are recommended every time after seal.



1-“Vac/Seal” button (with LED): Press this button to vacuum and seal bag ( intervals for 40 seconds are recommended each time)

2-“Seal” button( with LED): Press this button to seal bag without pumping the air out (intervals for 40 seconds are recommended each time). Please note that the compressor will still turn on to ensure the sealing strip is pressed tightly. See “Operation” for detailed instructions

3-“Stop” button: allow user to cancel any operation anytime






A Locking Hook Press the cover down until it clicks to lock the bag into place.

B Vacuum Chamber The bag opening must be placed within the vacuum chamber for the vacuum operation

C Lower gasket Airproof the vacuum area and prevent leaking for the vacuum

D Rubber Lip make seal flat

E Sealing Strip 3mm wide sealing strip for bag melting and sealing

F Vacuum nozzle Do not block the the nozzle when use. Also used to vacuum the wine with included Wine stopper accessory

G Release button




1. Plug the appliance in and switch it on.

2. Insert the opening of the bag into the vacuum chamber as shown on the above pictures.

3. Press down the latches of two sides at the same time until two click sounds heard.

4. Push the middle of the cover gently to ensure sealing strip is pressed tightly along all the length.

5. Press the “Seal”button and the LED will light on. When the Led light disappears, the seal is operation is finished.

6. Press “Release Button”4 to open the appliance, then take out the sealed bag




1. Plug the appliance in and switch it on.

2. Put the items that you want to preserve inside the bag.

3. Clean and straighten the opening of the bag ,make sure there are no wrinkle on the opening.

4. Insert the opening of the bag into the vacuum chamber as the above pictures

5. Press down the latches of two sides at the same time until two click sounds heard.

6. Press the “Vacuum/Seal” button and the LED will light, then the bag will be automatically vacuumed and sealed. When the LED light disappears ,the process is completed.

7 . Press the release buttons at two sides, then take out the sealed items.




1.Do not overfill the bags, leave enough length at the opening of the bag so that it can be placed in the vacuum chamber easily.

2.Ensure that the opening the bag is not wet. A wet bag may be difficult to melt and seal tightly.

3.Vacuum seal can not completely replace the refrigeration and freezing, perishable foods still need to be refrigerated or frozen.

4.Make the opening of plastic bags clean and flat, no foreign objects or folds allowed, otherwise it will cause difficulty or leak during seal.

5.To prevent wrinkles in a seal when vacuum sealing bulky items, gently stretch bag flat while inserting into the vacuum chamber and hold it until the pump begins to work.

6.Pre-freeze fruits and blanch vegetables before vacuum sealing for the best results.

7.Intervals for 40 seconds after seal or vacuum are recommended.

8.If you are unsure whether your bag was sealed properly, simply reseal the bag.

9.For best results, please use Bags, Rolls and Accessories, specially designed for vacuum sealing machines.




1.Always unplug the unit before cleaning.

2.Don't immerse the appliance in water on other liquid for cleaning.

3.Do not use abrasive cleaners to clean, because it is easy to scratch the surface of the appliance.

4.Wipe the outside of the appliance with a damp cloth or sponge with mild soap if necessary.

5.To clean the vacuum chamber, wipe away any food or liquid with a tissue paper.

6.Dry thoroughly before using again.




1.Examine seal of bag. A wrinkle along the seal may cause leakage and allow air to enter. Simply cut bag and reseal.

2.Sometimes moisture or food material (such as juices, grease, crumbs, powders, etc.) along seal prevents bag from sealing properly. Cut bag, wipe top inside of bag and reseal.

3.If you vacuum package sharp food items ,bag may have been punctured, use a new bag if there is a hole. Cover sharp food items with a soft cushioning material, such as a tissue paper, and reseal.

4.If there's air still in the bag, fermentation or the release of natural gases from inside the foods may have occurred, when this happens ,food may have begun to spoil and should be discarded.

THE BAG MELTS: If the bag melts, rubber lip may have become too hot, always wait at least 40 seconds for appliance to cool down before you vacuum package another item.




Nothing happens when you try to vacuum package:

1.Check if the power cord is tightly plugged into electrical outlet.

2.Check if the power cord is damaged.

3.Check if electrical outlet is working by plugging in another appliance.

4.Make sure the latches are in the locked position.

5.Make sure bag is placed correctly inside Vacuum Chamber.

6.Allow the appliance to cool for 40 seconds before using it again Note:To prevent overheating of the appliance, allow the appliance to cool for 40 seconds before using it again, and keep the cover open




1.Make sure the opening of the bag is placed entirely inside Vacuum Chamber.

2.AIR IS STILL IN THE BAG AFTER VACUUM: Examine the bag for leaks. Seal bag with air, then immerse it in water and apply pressure. Bubbles indicate a leak, use a new bag if bubbles appear.

3. If you use a Bag with customized size, check the seal of bag. A wrinkle in the bag along the seal may cause leakage and allow air to re-enter, just cut bag and reseal.

4.Do not attempt to make your own side seams for an Bag, the bags are manufactured with special side seams , which are sealed all the way to the outer edge. Making your own side seams may cause leakage and allow air to re-enter

The Complete System Accessories


Get the most out of your appliance with easy-to-use Bags, Canisters and Accessories.




The design of Bags and Rolls features special channels that enable the efficient and complete removal of air, The multi-ply construction makes them an especially effective barrier to oxygen and moisture, preventing freezer burn. Bags and Rolls can be provided with a variety of sizes.

IMPORTANT: To avoid possible contamination, do not reuse bags after storing raw meats, raw fish or greasy foods. Do not reuse bags that have been microwaved or simmered. WINE STOPPER Use Wine Stoppers to vacuum package wine, non-carbonated liquids and oils. This will extend the life of the product and preserve the flavor. Don't use the Wine Stopper on plastic bottles.

Note: Do not vacuum package carbonated or sparkling beverages as gas removal will cause them to go flat. 


Rated Voltage: 110V AC

Rated Frequency: 60Hz

Rated Power: 110W

Sealing Time: 6 ~10 Seconds

VAC/Sealing Time: 10~20 Seconds

Vacuum Power: -0.8 bar

Dimensions: Length:14.5 in Width: 5.2 in Height: 2.5 in N.W.:2.1 lbs G.W.:3.5 lbs T

Shipping Information



All orders are processed within 3-5 days.

We currently ship within the continental U.S. only. We apologize for any inconvenience, but we cannot ship to P.O. Boxes or APO addresses. Please refer to the item description to determine the normal order processing time.


Purchases may be returned within 45 days of the date your order was received and must be unused, unassembled and in the original condition and packaging for any refunds issued. Please contact us for a Return Authorization Number, as returns cannot be accepted without this number. Please include the reason for your return in an email.

Please allow up to 2 business days for your return to be inspected and processed before your payment method is credited.

Note - EXCEPTIONS: **Custom painted and/or personalized items that are made especially for you are non-refundable, unless defective. Items that fall into this category will be noted on the item page.

*We reserve the right to send replacement parts for damaged or defective parts whenever possible. If replacement parts are refused, the item will be handled as a normal return.


Please do not use the item and keep items with all packaging materials and box for inspection. Please notify us the same day. We will not be able to replace damaged merchandise if we are not notified within 5 business days of the delivery date.